Development of a heat exchanger device- regenerator for high-temperature gas heating
https://doi.org/10.30724/1998-9903-2019-21-5-38-49
Abstract
The urgency of the task is to develop a heat exchanger-regenerator designed for high- temperature heating of gaseous media, which are used in various technological schemes of the petrochemical, gas processing, energy and other industries. The developed heat exchanger has high performance due to the developed heat exchange surface, reliability due to the fact that the inner and outer pipes are movable relative to each other with linear dimensions compensation, it is simple to manufacture, does not require the use of an intermediate heat carrier, can be used as a heating coolant combustion products of untreated, low-grade gaseous fuel. At the same time, it is possible to equip the developed apparatus with a convection heat exchanger for more efficient use of the heat of the fuel combustion products. The article describes the proposed design, the principle of operation of this heat exchanger-regenerator. A review of the technical literature has been carried out, the main advantages of the device are shown in comparison with the currently known domestic and foreign counterparts. The paper presents the main calculated dependencies used in the design, as well as the results of the calculations. The possibility of using the proposed heat exchanger as part of a gas turbine unit used as an autonomous power source is considered, as well as information about technological processes in which it can be used. In conclusion, we can say that the developed heat exchanger has high performance, differs in the ability to work at high temperatures without violating the integrity of the structure, does not require the use of an intermediate heat carrier, and is to be used in many industries.
Keywords
About the Authors
D. A. BazykinRussian Federation
Denis A. Bazykin
Voronezh
A. I. Sukhov
Russian Federation
Anatoly I. Sukhov
Voronezh
A. V. Barakov
Russian Federation
Alexander V. Barakov
Voronezh
References
1. Gorshkov MV, Pashali DY. On the use of gas turbine power plants in oil fields to ensure the reliability of power supply and environmental friendliness . Innovation science. 2018;7-8:32-35.
2. Leusheva YeL, Morenov VA. ` Electric power supply of production facilities in arctic conditions when the wells are constructed in clusters . Oil and Gas Territory. 2015;5:92-95.
3. Sadykov BH. Autonomous power supply of oil fields. Science today. Key problems and development prospects. 2015. pp. 91–92.
4. Romanov VV, Spitsyn VE, Botsula AL, et al. Features of the creation of a gas turbine unit of the regenerative cycle for gas pumping units. Eastern-European Journal of Enterprise Technologies. 2009;4(40):16-20.
5. Sukhov AI, Lachugin IG, Shevtsov AP, et al. Improved production of electricity by using gas turbine plant. Pumps. Turbines. Systems. 2013;1(6):22-26.
6. Hasanov NG, Shigapov AB. The influence of real properties of combustion materials parameters on stationary gas turbine units. Proceedings of the higher educational institutions. Energy sector problems. 2014;9-10:11–20.
7. Chmielniak T, Czaja D, Lepszy S. Selection of the air heat exchanger operating in a gas turbine air bottoming cycle . Archives of thermodynamics. 2013;34(4): 93-106.
8. Kosowski K, Tucki K, Piwowarski M, et al. Thermodynamic cycle concepts for high-efficiency power plants. Pt B. Prosumer and distributed power industry Sustainability. 2019;11:3-16.
9. Smirnov JA, Chistik SM, Parshin SN, et al. Podogrevatel' zhidkih i gazoobraznyh sred. Patent No. 2296921 RF, F 24 H 3/08. N. 2005122794/06; opubl. 10.04.2007; Byul. N.10. P.8.
10. Abalakov GV, Timonin VA, Shushin NA. Podogrevatel' prirodnogo gaza i gazovaja gorelka podogrevatelja. Patent N. 58674 RF, F 24 H 3/08. N. 2006119680/22; opubl. 27.11.2006; B. N. 33.
11. Dobrjanskij VL, Zaretskij JaV, Korotkov LV. Tehnologicheskij nagrevatel'. Patent N. 2168121 RF, F 24 H 3/08. No. 99119765/06; opubl. 27.05.2001 Byul. N. 15.
12. AL-Attab K.A, Zainal ZA. Design of high temperature heat exchanger for the indirectly firing of a micro gas turbine using biomassfuels . Product & Design. 2007. pp. 22-26.
13. Amirante R, Tamburrano P. High Temperature Gas-to-Gas Heat Exchanger Based on a Solid Intermediate Medium . Advances in Mechanical Engineering. 2014. P.20 .
14. Shevtsov IG, Hohlov AP, Suhov VJ, et al. Podogrevatel' gazoobraznyh sred Patent No. 2686357 RF, F 24 H 3/08, F 24 H 3/ N. 2018105811; opubl. 25.04.2019; Byul. N.12.
15. Zatsepin SS, Kuptsov SM. The Use Of Turbo-Expander Units On Gas-Distributing Stations. Oil and Gas Territory. 2016;12:50-53.
16. Astashev SI, Medvedeva ON. The development of an alternative method for heating of fuel gas in gas transmittal units . Scientific-technical journal «Bulletin of Civil Engineers». 2017;6(65):172-176.
17. Agababov VS, Korjagin AV, Arharova AY. Efficiency of using two-stage gas preheating before the expander-generating unit at thermal power plants. Energy saving and water treatment. 2004;4(31):70-72.
18. Evdokimov YY, Ten'kovskij DV. Technologies with small power consumption at remote objects of the Far North. Exposition Oil Gas. 2014;6(38):64-65.
19. Yefimov VV, Khaluylun DV, Khaluyluna LE. Problems of separation in the formation of gas hydrates on the elements of internal devices of separators in the field preparation of natural gas. International Scientific Review. 2018;1(40):27-34.
Review
For citations:
Bazykin D.A., Sukhov A.I., Barakov A.V. Development of a heat exchanger device- regenerator for high-temperature gas heating. Power engineering: research, equipment, technology. 2019;21(5):38-49. (In Russ.) https://doi.org/10.30724/1998-9903-2019-21-5-38-49