Electromechanical drive management energy
https://doi.org/10.30724/1998-9903-2019-21-6-3-10
Abstract
The development of an intelligent energy storage management system is an up-to-date scientific and technical challenge. This system should ensure maximum efficiency of energy storage in power networks for various purposes. The article discusses the use of energy storage in distribution networks of an industrial enterprise and substantiation of the vector control method of the inverted synchronous motor of the energy storage SPENE-1, shows a block diagram of the vector system for controlling the energy accumulator motor and the results of its simulation in MatLab.
Supporting agencies: This work was financially supported by the Ministry of Science and Higher Education of the Russian Federation as part of the implementation of the Federal Targeted Program “Research and Development in Priority Directions for the Development of the Scientific and Technological Complex of Russia for 2014–2020”, the project identification number is RFMEFI57818X0265 (agreement of 11.27.2018 № 075-02-2018-209 (14.578.21.0265)). The customer is the Ministry of Education and Science of the Russian Federation.
About the Authors
N. I. Smolentsev
Siberian State University of Telecommunications and Informatics
Russian Federation
Nikolay I. Smolentsev
Russian Federation
Nikolay I. Smolentsev
L. M. Chetoshnikovа
Branch of the South Ural State University (NRU) in Miass
Russian Federation
Larisa M. Chetoshnikova
Russian Federation
Larisa M. Chetoshnikova
A. N. Ignatov
Siberian State University of Telecommunications and Informatics
Russian Federation
Alexander N. Ignatov
Russian Federation
Alexander N. Ignatov
References
1. Smolentsev NI, Kondrin SA. Superconducting electrokinetic energy storage for local electrical networks. News of higher educational institutions. Energy problems. 2017;19(3-4):53-60.
2. Smolentsev NI. Electromechanical superconducting energy storage. Pat. 2601590 Russian Federation, IPC7 NC 7/02, NC 7/09. /№ 2015115350/07; Claims 04/23/2015; publ. 10.11.2016. Bul N. 31.
3. Matveev VA. Superconducting magnetic suspension for kinetic energy storage: Pat. 2551864 RF: MPK7 F 16 C 32/04. claimed 04.04.2014
4. Korelsky DV, Potapenko EM, Vasilyeva. Review of modern methods of control of synchronous motors with permanent magnets. Radio electronics. Computer science. Control. 2001;2:155-159.
5. Experimental Setup and Efficiency Evaluation of Zero-Field-Cooled ZFCYBCO Magnetic Bearings. IEEE Transactions on Applied Superconductivity. 2017; 27(4). pp. 360-1105.
6. Tang J. Superconducting and energy storage magnetic suspension flywheel with high energy density: Pat. CN102664567 China: Ipc7 H 02 K 7/02.
7. Pieronek TJ, Decker DK, Spector VA. Spacecraft Flywheel Systems -Benefits and Issues. IEEE, 1997. Iosif'yanovskie chteniya. 2016.
8. Korelsky DV, Potapenko EM, Vasilieva. Review of modern methods of control of synchronous motors with permanent magnets. Radio electronics. Computer science. Control. 2001;2:155-159.
9. Korobko GI, Khvatov OS, Korobko IG. Development and simulation of a diesel generator with a variable rotation frequency in the ship's unified electric power installation system. Vestnik of Ivanovo State Energy University. 2017;1:55-61.
10. Shevchenko VP, Babiychuk OB. Synchronous motor with frequency regulation. Electrical and computer systems. 2014;4 (90):39-42.
11. Ali Emadi. Energy-efficient Eelectric Motors. 3ed revised and expanded. (2005), New York, Mar-sel Dekker Inc., 400 p.
12. Lyatochkin IV, Smolentsev NI. The choice of parameters of the energy storage and optimization of the enterprise's power supply system. PolzunovskyVestnik. 2016;4(2):65-69.
13. Baluev DYu, Zyryanov VM, Kiryanova NG, Prankevich GA. The method of calculating the main parameters of the energy storage on the experimental load diagrams. Bulletin of the Irkutsk State Technical University. 2018;22:5(136):105.
14. Songa Z, Lib J, Hou J, et al. He Battery-Super capacitor Hybrid Energy Storage System in Electric Vehicle Applications: A Case Study. Energy. 2018;154:433-441. doi: 10.1016/j.energy.2018.04.148.
15. Kovalchuk DA, Mazur AV. Vector control of a synchronous motor. Automation of technological and business processes. 2014;17:71-75.
16. Ignatov AN, Kuvardin KV, Shabronov AA. Method of forming a pulse-width modulation signal for direct current motor control. Pat. 2665671 RF / SibSUTI. N. 2015121006; declare 06/02/2015; publ. 03.09.2018. Bull. N. 25 .
17. Gorte OI, Zyryanov VM, Kiryanova NG; Baruch OV editors. Method of choosing parameters of energy storage under alternating load. Nauka. Technologies. Innovations. Collection of scientific papers. Novosibirsk: Publishing house NGTU, 2017. pp.135-138.
Review
For citations:
Smolentsev N.I., Chetoshnikovа L.M., Ignatov A.N. Electromechanical drive management energy. Power engineering: research, equipment, technology. 2019;21(6):3-10. (In Russ.) https://doi.org/10.30724/1998-9903-2019-21-6-3-10
Views:
527
Email this article 