Preview

Power engineering: research, equipment, technology

Advanced search

Creating a computer model of a synchronous motor for the implementation of the project «Creation of a series of electric motors with a modernized rotor for electric transport of low power»

https://doi.org/10.30724/1998-9903-2024-26-2-46-54

Abstract

RELEVANCE. The challenges of creating modern permanent magnet synchronous motors require solving technical problems in conjunction with economic realities. Due to the use of permanent magnets in the construction of synchronous motors, their cost limits their industrial application. Therefore, there is an urgent issue of optimizing the design of synchronous motors, which can be solved by changing the topology.
TARGET. The goal is to create more economical permanent magnet synchronous motors (PMSMs) in low-power electric vehicles. It is planned to implement a new method for constructing PMSM. This solution will reduce weight and size parameters and increase specific power, which are important indicators for electric transport.
METHODS. To modernize modern synchronous motors, a complex topological optimization method based on a genetic algorithm is proposed.
RESULTS. A computer model was obtained in the form of calculation of electromagnetic fields in the stator and rotor of a synchronous motor with permanent magnets.
CONCLUSION. Modeling the parameters of synchronous motors with permanent magnets has a low degree of development in the domestic mechanical engineering due to the lack of developed infrastructure in the field of low-power electric transport; the creation of domestic developments in this area is of a strategic nature.

About the Authors

V. R. Basenko
Kazan State Power Engineering University
Russian Federation

Vasily R. Basenko

Kazan



T. I. Petrov
Kazan State Power Engineering University
Russian Federation

Timur I. Petrov

Kazan



A. R. Ibragimova
Kazan State Power Engineering University
Russian Federation

Aigul R. Ibragimova

Kazan



References

1. Petrov, T. I. Stand for measuring the torque and rotational speed of synchronous motors with permanent magnets / T. I. Petrov, V. R. Basenko // Dispatch and control in the electric power industry: Proceedings of the XVII All-Russian Open Youth Scientific and Practical Conference , Kazan, October 20–22, 2022 / Editorial Board: A.G. Arzamasova (responsible editor). - Kazan: LLC "Publishing House Foliant", 2022. - S. 203-206. -EDN KVYKDF.

2. Safin A. R., Tsvetkov A. N., Petrov T. I. [et al.] Development of a model of a mobile electric transport charge unit and a test bench // Natural and technical sciences. - 2023. - No. 7 (182). – S. 138-145. – DOI 10.25633/ETN.2023.07.09. – EDN NZWEGG.

3. Khanchandani K.B., Power electronics / K.V. Khanchandani // ISBN: 978-0-07-058389-7 - pp. 908-959.

4. Gulyaev I.V. Permanent Magnet Synchronous Motor Vector Control / I.V. Gulyaev, A.V. Volkov, A.A. Popov and others // Scientific and technical bulletin of the Volga region. - 2015. - No. 5. - P. 187-191.

5. Gulyaev I.V. The operation of an asynchronized brushless motor with the consumption of purely active power from the armature / Tutaev G.M., Yushkov I.S., Volkov A.V. // Actual problems of electronic instrumentation, Proceedings of the XII International Conference: APEP-2014. 2014. S. 241-244.

6. Wang L. Direct torque control for PMSM / L. Wang, Yu. Gao // Proceedings of IEEE International Electrical Machines and Drives Conference IEMDC. - 2007. - S. 403-406.

7. Gulyaev I.V. Electric drive based on asynchronized valve motor / I.V. Gulyaev, A.V. Volkov, A.A. Popov and others // Scientific and technical bulletin of the Volga region. - 2015. - No. 1. - S. 70-73.

8. Development of an algorithm for the operation of a control station for a mobile electric vehicle charge unit. / A. R. Safin, A. N. Tsvetkov, E. I. Gracheva, T. I. Petrov // Bulletin of PITTU named after academician M.S. Osimi. – 2022. – No. 4(25). – P. 37-44. – EDN FLAYJK.

9. Petrov, T. I., Safin, A. R., and Behera, R. K. Design features of permanent magnet synchronous motors using complex topological optimization, Bulletin of the Kazan State Power Engineering University. - 2023. - T. 15, No. 1 (57). - S. 58-67. – EDN KKTGUR.

10. Development of the technology of mobile charging stations for electric vehicles / A. R. Safin, I. V. Ivshin, A. N. Tsvetkov [et al.] // News of higher educational institutions. Energy problems. - 2021. - T. 23, No. 5. - S. 100-114. – DOI 10.30724/1998-9903-2021-23-5-100-114. – EDN YIGCHH.

11. Petrov T.I., Safin A.R., Gracheva E.I. [et al.] Modeling the operation of equipment for a mobile charging installation for charging electric vehicles in order to confirm compliance with climatic and mechanical performance groups // Bulletin of MSTU. Proceedings of the Murmansk State Technical University. - 2022. - T. 25, No. 4. - S. 365-377. – DOI 10.21443/1560-9278-2022-25-4-365-377. – EDN JILKEG.

12. Firago B. I., Vasil’ev D. S. (2016) Vector Systems Control of Electrical Drives. Minsk, Vysheishaya Shkola Publ. 159 (in Russian).

13. Safin, A. R. Optimization of the model of a synchronous motor with permanent magnets to reduce the time for calculating the torque / A. R. Safin, T. I. Petrov // Bulletin of PITTU named after academician M.S. Osimi. - 2021. - No. 3 (20). - S. 31-37. – EDN TBKBRC.

14. Laser Control and Measuring Complex for Non-contact Vibration Control of the Power Transformer Technical Condition / V. Basenko, O. Vladimirov, I. Ivshin [et al.] // Lecture Notes in Civil Engineering. - 2022. - Vol. 190. - P. 157-167. – DOI 10.1007/978-3-030-86047-9_17. – EDN EIGGGZ.

15. Basenko, V.R., Nizamiev, M.F., Ivshin, I.V., and Vladimirov, O.V., 3D model of a power transformer for the study of its technical condition in terms of vibrational parameters, Izv. Energy problems. - 2022. - T. 24, No. 3. - S. 130-143. – DOI 10.30724/1998-9903-2022-24-3-130-143. – EDN TTLTL.


Review

For citations:


Basenko V.R., Petrov T.I., Ibragimova A.R. Creating a computer model of a synchronous motor for the implementation of the project «Creation of a series of electric motors with a modernized rotor for electric transport of low power». Power engineering: research, equipment, technology. 2024;26(2):46-54. (In Russ.) https://doi.org/10.30724/1998-9903-2024-26-2-46-54

Views: 292


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1998-9903 (Print)
ISSN 2658-5456 (Online)