MULTIVULATED FREQUENCY-REGULATED ELECTRIC DRIVE OF CORD WRAPPING LINE
https://doi.org/10.30724/1998-9903-2018-20-3-4-89-98
Abstract
The urgency of the work is due to the need to develop a multi-motor frequency-controlled electric drive for cord clipping lines. The study of the construction of energy-efficient multi-motor drives, with the help of reversible frequency converters, which can reduce the total installed power of the multi-motor drive of the cord line. Justification of the choice of the most suitable design, based on the use in the inverter current circuit of lockable gates such as GTO or IGBT and polar damping capacitors as part of protection against possible increases in switching overvoltage.
About the Authors
S. N. Sidorov
Ulyanovsk State Technical University
Russian Federation
Russian Federation
Cand. of Technical Sciences, Assistant professor of the electric drive and automation of industrial installations of the power faculty of the Ulyanovsk State Technical University
N. I. Gorbachevsky
Nizhnekamsk Chemical-Technological Institute
Russian Federation
Russian Federation
Cand. of Technical Sciences, Head of the Department of Electrical Engineering and Power Supply of Enterprises of the Faculty of Management and Automation of the Nizhnekamsk Institute of Chemistry and Technology «Kazan National Research Technological University»
E. N. Gavrilov
Nizhnekamsk Chemical-Technological Institute
Russian Federation
Russian Federation
Cand. of Technical Sciences, Associate Professor of the Department of Electrical Engineering and Power Supply of Enterprises of the Faculty of Management and Automation of Nizhnekamsk Chemical and Technological Institute «Kazan National Research Technological University»
References
1. Frequency-regulated electric drives in tire production technologies Sidorov, V.N. Dmitriev, R.N. Ganiev. Ed. N.I. Gorbachevsky. - Ulyanovsk: UlSTU, 2015. 223 with.
2. Sidorov S.N The system of frequency-current control of the electric drive on the basis of the lockable valves // Drive technology. 2011. № 1. P.14-19.
3. Sidorov S.N. Matrix frequency converter in scalar control modes. // Electricity. 2010. № 7. P. 26-33.
4. Development, research and implementation of frequency-controlled electric drive of an extruder in the production of automobile tires: monograph / R/N Ganiev. Nizhnekamsk: NСTI FSBEI "KNRU", 2015. 126 p.
5. Ganiev R.N, Gorbachevsky N.I, Platov V.N Problems of modernization of electric drives of technological installations of extrusion type // But the Tula State University "Technical Sciences". Tula: TulSTU, 2010. P. 16-22.
6. Gorbachevsky N.I Development, research and introduction of the electrotechnical complex of the rubber-mixer: the author's abstract. dis. ... cand. tech. Nizhny Novgorod, 2006.
7. Orlov S.P Increase of efficiency of electrical equipment and control system of extrusion line: dis. ... cand. tech. - Krasnodar, 2005. 193 with.
8. Designing extrusion machines taking into account the quality of rubber products: monograph / M.V Sokolov [and others]. M.: Mechanical engineering. 2007. 292 p.
9. Rauvendal, K. Extrusion of polymers: Per. with angl.A. J. Malkina / K. Rauwendaal. SPb .: The profession, 2008 762 p.
10. Fundamentals of the technology of tire production / G. Ya. Vlasov [and others] Voronezh: State Technological Academy. 2002. 459 p.
11. Philips, C. Control systems with feedback: Per. with English. B. I. Kopylova / C. Phillips, P. Harbor. - Moscow: Laboratory of Basic Knowledge, 2001. 616 p. yl.
12. Shreiner, R.T. Mathematical Modeling of AC Drives with Semiconductor Frequency Converters / R.T. Shreiner. Ekaterinburg: Uro RAS. 2000. 654 p.
Review
For citations:
Sidorov S.N., Gorbachevsky N.I., Gavrilov E.N. MULTIVULATED FREQUENCY-REGULATED ELECTRIC DRIVE OF CORD WRAPPING LINE. Power engineering: research, equipment, technology. 2018;20(3-4):89-98. (In Russ.) https://doi.org/10.30724/1998-9903-2018-20-3-4-89-98
Views:
480
Email this article 