COMPARATIVE ANALYSIS OF THE FEATURES OF SPRAYING A HEATED GAS AND SUPERHEATED LIQUID THROUGH CYLINDRICAL CHANNELS WITH SLICES
https://doi.org/10.30724/1998-9903-2018-20-9-10-60-70
Abstract
The article presents the experimental studies results of a superheated liquid and a heated gas spraying through nozzles with cuts in order to determine the influence of the channel configuration on the characteristics of the jets. Experimental setups, experimental methods and instrumentation are described in the article. Photographing and thermal imaging was used to visualize the flow of liquids and gases. It was determined that there is no displacement of the jet axis relatively to the axis of the outlet opening when the heated gas flows through the nozzles with a cut. It is shown that there is a displacement of the axis of the jet relative to the axis of the outlet in the range of 15-18 degrees when the superheated water flows through the nozzles having a cut of the off outlet.
About the Authors
L. V. Plotnikov
Ural Federal University named after the first President of Russia B.N. Yeltsin,
Ekaterinburg
Russian Federation
PhD (tech) Sci, associate Professor, Department of turbines and engines
Russian Federation
PhD (tech) Sci, associate Professor, Department of turbines and engines
Y. M. Brodov
Ural Federal University named after the first President of Russia B.N. Yeltsin,
Ekaterinburg
Russian Federation
Sci (physical&mathematical), Professor, Department «Heat power and heat engineering»
Russian Federation
Sci (physical&mathematical), Professor, Department «Heat power and heat engineering»
B. P. Zhilkin
Ural Federal University named after the first President of Russia B.N. Yeltsin,
Ekaterinburg
Russian Federation
Doc. Sci (tech), head Department of turbines and engines
Russian Federation
Doc. Sci (tech), head Department of turbines and engines
N. S. Kochev
Ural Federal University named after the first President of Russia B.N. Yeltsin,
Ekaterinburg
Russian Federation
postgraduate student, Department «Heat power and heat engineering»
Russian Federation
postgraduate student, Department «Heat power and heat engineering»
References
1. Vitman L.A., Kacnel'son B.D., Paleev I.I. Spraying liquid nozzles. Ed. S.S. Kutateladze. Moscow: State Energy Publishing House, 1962. 258 p.
2. Ditjakin Ju.F., Kljachko L.A. Spraying of liquids. Moscow: Mechanical Engineering, 1977. 206 p.
3. Liu H. Science and Engineering of Droplets Fundamentals and Applications. William Andrew Publishing: Noyes, 2000. 508 p.
4. Experimental researches regarding the dispersion angle of the nozzle jet from spraying machines / Roşu M., Cǎsǎndroiu T., Matache M.G., Vlǎduţ V., Pruteanu A. // UPB Scientific Bulletin, Series D: Mechanical Engineering. 2018. Vol. 80, No 1. P. 207–218.
5. Influence of the alternative process of fuel injection on local formations of nitrogen oxides and soot in the combustion chamber of a diesel engine / R.Z. Kavtaradze, D.O. Onishhenko, I.A. Zinov'ev, A.S. Golosov // Izvestiya of the Russian Academy of Sciences. Power Engineering. 2016. No 5. P. 152–159.
6. G.P. Merker, C. Schwarz, G. Stiesch, F. Otto. Simulating Combustion, Springer-Verlag Berlin Heidelberg, 2006. 401 р.
7. Grehov L.V. Injection of diesel fuel under pressure up to 400 MPa / L.V. Grehov, A.A. Denisov, E.E. Starkov // National Association of Scientists, 2015. No 8. P. 24–28.
8. Grehov L.V. Accumulator fuel systems of internal combustion engines of the Common Rail type / L.V. Grehov. Moscow: MSTU, 2000. 64 p.
9. Effect of the nozzle holder on injected fuel temperature for experimental test rigs and its influence on diesel sprays / J. Gimeno, P. Martí-Aldaraví, M. Carreres, J.E. Peraza // International Journal of Engine Research. 2018. Vol. 19, No 3. P. 374–389.
10. Zhilkin B.P., Zaikov N.S., Kisel'nikov A.Yu., Mirenskii V.Yu., Khudyakov P.Yu. Thermal imaging identification of turbulent structures in gas flows // Instruments and experimental techniques. 2006. Vol. 53, No 1. P. 143–146.
11. Zhilkin B.P., Larionov I.D., Shuba A.N. Device for measuring the temperature field of a gas stream. Patent for invention № 2230300 RU of 10.04.2002.
12. Zhilkin B.P., Larionov I.D., Shuba A.N. Applications of an infrared imager for determining temperature fields in gas flows // Instruments and experimental techniques. 2004. Vol. 47, No 4. P. 545–546.
13. Busov K.A. Dynamic characteristics of jets of superheated water when flowing through short channels / К.А. Busov // Thermal processes in engineering. 2011. Vol. 3. No 7. Р.308–313.
14. The influence of thermal and geometric factors on the spraying of liquids during explosive boiling / N.A. Mazhejko, A.V. Reshetnikov, K.A. Busov, V.P. Koverda, A.A. Starostin, L.V. Plotnikov, B.P. Zhilkin, Yu.M. Brodov // Heavy machine building. 2014. No 6. P. 35–40.
15. Reshetnikov A.V., Mazheiko N.A., Skokov V.N., Koverda V.P. Hydrodynamic response to explosive boiling-up in a jet of superheated water // International Journal of Heat and Mass Transfer. 2015. Vol. 85. P. 965–970.
16. Reshetnikov A.V., Busov K.A., Mazheiko N.A., Skokov V.N., Koverda V.P. Transient behavior of superheated water jets boiling // Thermophysics and Aeromechanics. 2012. Vol. 19, No 2. P. 329–336.
Review
For citations:
Plotnikov L.V., Brodov Y.M., Zhilkin B.P., Kochev N.S. COMPARATIVE ANALYSIS OF THE FEATURES OF SPRAYING A HEATED GAS AND SUPERHEATED LIQUID THROUGH CYLINDRICAL CHANNELS WITH SLICES. Power engineering: research, equipment, technology. 2018;20(9-10):60-70. (In Russ.) https://doi.org/10.30724/1998-9903-2018-20-9-10-60-70
Views:
449
Email this article 