DETERMINATION OF PEAT ASH FUSIBILITY OF KIROV REGION DEPOSITS
https://doi.org/10.30724/1998-9903-2018-20-11-12-27-33
Abstract
The paper deals with the issues related to the effect of slagging within the steam boilers furnaces and shows the determination results on peat ash fusibility of Kirov region deposits. Fusibility properties of peat ash (temperatures of deformation, sphere, hemisphere and flow) from the four industrial areas (Dymny, Pishchalsky, Karinsky, Gorokhovsky) depending on its chemical composition are presented. Melting temperature of the mineral part of the peat, determined by GOST, is averaged and does not reflect the actual melting temperature of the individual particles in fly ash. The existence of such separate particles having a melting temperature below the average melting temperature of the ash makes it difficult to find the operating temperature of the torch to reach the minimum of the furnace slagging during peat combustion. The comparison of melting characteristics of peat ash with the reference literature data is performed. The initial slagging temperature is calculated depending on the ratio of the acidic and basic oxides in peat ash.
About the Authors
V. A. Kuzmin
Vyatka State University, Kirov
Russian Federation
Vladimir A. Kuzmin –Grand PhD in Engineering sciences, Professor
Russian Federation
Vladimir A. Kuzmin –Grand PhD in Engineering sciences, Professor
I. A. Zagrai
Vyatka State University, Kirov
Russian Federation
Iraida A. Zagrai– PhD in Engineering sciences, Associate Professor
Russian Federation
Iraida A. Zagrai– PhD in Engineering sciences, Associate Professor
I. A. Desiatkov
Vyatka State University, Kirov
Russian Federation
Ivan A.Desiatkov– PhD student
Russian Federation
Ivan A.Desiatkov– PhD student
References
1. V.M. Popov, A.M. Shabarov, A.I. Gushchin, Energy use of milled peat, Energiya, Moscow, 1974, 303 p. (in Russian)
2. J.Fage, Influence of peat Ash composition on particle emissions and slag formation in biomass grate co-combustion, Energy Fuels, 2014, Vol. 28(5), P. 3403−3411. https://doi.org/10.1021/ef4023543.
3. R. Heikkinen, Slagging tendency of peat ash, Fuel Processing Technology, 1988, Vol. 56, P. 69–80.
4. Villa Vares, Yulo Kask, Peeter Muiste et al., Biofuel consumer handbook, Tallinn University of technology, Tallin, 2005. 183 p. (in Russian)
5. D.M. Khzmalyan, Y.A. Kagan, Combustion theory and furnace devices, Energiya, Moscow, 1976, 488 p. (in Russian)
6. E.T. Bazin, Technical analysis of peat, Nedra, Moscow, 1992, 431 p. (in Russian)
7. I.I. Lishtvan, N.T.Korol', Basic peat properties and methods of their determination, Nauka i tehnika, Minsk, 1975, 320 p. (in Russian)
8. А.N. Аlekhnovich, N.V. Аrtem'eva, Some problems and priority tasks of mathematical modeling of furnace slagging, Solid fuel combustion: materials of the VIII all-Russian conference with Intern. participation, 13-16 November 2012, Institute of Thermophysics (IT SB RAS), Novosibirsk, 2012. 4.1–4.8. (in Russian)
9. А.N. Аlekhnovich, Slagging of pulverized coal-fired power boilers, NTF Energoprogress, Moscow, 2013. 112 p. (in Russian)
10. A.N. Alekhnovich, V.V. Bogomolov, V.E. Gladkov, N.V. Artem'eva, Slagging and deposit formation in the gas path of a boiler, Thermal Engineering, 1997, Vol. 44, No. 3, P. 239-243.
11. Energy fuel of the USSR (fossil coals, oil shale, peat, fuel oil and combustible natural gas): Directory, I.I. Matveeva, N.V. Novitsky, V.S. Vdovchenko, et al. Energiya, Moscow, 1979, 128 p. (in Russian)
12. V.E. Gladkov, Zh.Z. Aflyatunov, V.V. Viktorov, Temperature conditions of the beginning of formation of slag deposits at their flaring, Bulletin of SUSU, Series "Mathematics, physics, chemistry", 2006, No. 7, P. 227-232. (in Russian)
Review
For citations:
Kuzmin V.A., Zagrai I.A., Desiatkov I.A. DETERMINATION OF PEAT ASH FUSIBILITY OF KIROV REGION DEPOSITS. Power engineering: research, equipment, technology. 2018;20(11-12):27-33. (In Russ.) https://doi.org/10.30724/1998-9903-2018-20-11-12-27-33
Views:
666
Email this article 