INDICATORS OF ENERGY AND SEPARATION EFFICIENCY OF GAS SEPARATORS INTENDED TO REMOVE AEROSOL DROPLETS
https://doi.org/10.30724/1998-9903-2019-21-1-2-3-9
Abstract
Abstract: Energy coefficients and energy efficiency criteria for heat and mass transfer devices are considered. With application of these coefficients and criteria, modified complexes for the energy separation efficiency of packed-type gas separators aimed to remove liquid aerosols are obtained. Technical characteristics of structured and random packings are given and calculations of energy complexes and of the power required for supplying gas to the purification are made. It is determined that the spiral-prismatic packing is most efficient among all considered random packings and the spiral wound packing RGN-5 (manufactured by LLC EPC “Inzhekhim”) is most efficient among all considered structured packings.
About the Authors
A. G. Laptev
Kazan State Power Engineering University
Russian Federation
Russian Federation
Anatoly G. Laptev – Kazan State Power Engineering University
Kazan
M. M. Basharov
JSC “TANECO”
Russian Federation
Russian Federation
Marat M. Basharov – JSC “TANECO”
Nizhnekamsk
E. A. Lapteva
Kazan State Power Engineering University
Russian Federation
Russian Federation
Elena A. Lapteva – Kazan State Power Engineering University
Kazan
References
1. Busroyd R. Gas flow with suspended particles. Moscow: Mir, 1970. 323 p.
2. Mednikov E.P. Turbulent transport and deposition of aerosols. Moscow: Nauka, 1981. 176 p.
3. Laptev A.G., Basharov M.M., Lapteva E.A. Farakhov T.M. Models of interphase transport and calculation of process efficiency. Part 1. Hydromechanical processes. Kazan: Center for innovative technology, 2017. 392 p.
4. Sokolov V.N., Domanskii I.V. Gas-liquid reactors. Leningrad: Mashinostroenie Publishing House, 1976. 216 p.
5. Sokol B.A., Chernyshev A.K., Baranov D.A. Packings of mass transfer columns. Moscow: Galleya-print, 2009. 358 p.
6. Kagan A.M., Laptev A.G., Pushnov A.S., Farakhov M.I. Contact packings of industrial heat and mass transfer apparatuses. Kazan: Otechestvo, 2013. 454 p.
7. Ziyatdinov N.N. Modeling and optimization of chemical engineering processes and systems. 2017. V. 51, No. 6. P. 613–617.
8. Dmitriev A.V., Zinurov V.E., Dmitrieva O.S., Nguen Vu L. Capturing of finely dispersed solid particles from gas streams in rectangular separators // Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta. 2018. V. 22, No. 3 (134). P. 138–144.
9. Dmitriev A.V., Dmitrieva O.S., Madyshev I.N. Optimal designing of mass transfer apparatuses with jet-film contact devices // Chemical and Petroleum Engineering. 2017. V.53, P.1–5.
10. Ziganshin M.G., Kolesnik A.A., Ziganshin A.M. Designing apparatus for dust removal: a training manual. 2nd ed. Saint Petersburg: Lan Publishing House, 2014. 544 p.
11. Laptev A.G., Basharov M.M., Lapteva E.A. Separation and energy efficiency of packed apparatuses for purifying gases from aerosols // Theoretical foundations of chemical engineering. 2017, V.51, No.5. P. 639–646.
Review
For citations:
Laptev A.G., Basharov M.M., Lapteva E.A. INDICATORS OF ENERGY AND SEPARATION EFFICIENCY OF GAS SEPARATORS INTENDED TO REMOVE AEROSOL DROPLETS. Power engineering: research, equipment, technology. 2019;21(1-2):3-9. (In Russ.) https://doi.org/10.30724/1998-9903-2019-21-1-2-3-9
Views:
658
Email this article 