BUS BAR DAMPING IS A WAY OF INCREASING THE VIBRATION RELIABILITY OF TURBOGENERATOR STATORS
https://doi.org/10.30724/1998-9903-2019-21-1-2-19-27
Abstract
Abstract: The work is devoted to the consideration of the bus bar ring damping of turbogenerator stators. The urgency of the problem of ensuring the vibrational reliability of high-power turbogenerator stators is shown. On the model problem, a series of computational studies on the effect of damping properties of materials on the amplitude-frequency characteristics of the stator buses of turbogenerators was carried out. Based on the results of the computational studies, a bus bar design is proposed, comprising a layer of a vibration-absorbing material. The use of a vibration-absorbing polymeric material in bus bar ring can reduce the amplitude of oscillations up to two times and, accordingly, significantly improve the vibration reliability of the stator elements of the turbogenerator. The results of the research are protected by a patent.
About the Authors
S. N. Gavrilov
JSC "NPO CKTI"
Russian Federation
Russian Federation
Sergey N. Gavrilov - JSC "NPO CKTI"
Saint-Petersburg
Iu. K. Petrenya
PJSC "Power Machines"
Russian Federation
Russian Federation
Iurii K. Petrenya - CEO
Saint-Petersburg
References
1. Khutoretsky G.M., Fridman V.M., Shkolnik V.E. Solution of the stator vibration problem of a large-capacity turbogenerator.// Electrical Engineering. 1989. No. 2. P. 26–29.
2. Shumilov Yu.A., Shtogrin A.V. Reduction of damages of stators of powerful turbogenerators caused in the end zone (analysis, hypotheses, experiments). // Electrotechnika i Electromechanika. 2014. No. 1. P. 37–39.
3. Vibration in engineering. T.6 Protection against vibration and shock. / Revision of K.V. Frolov. Moscow: "Mechanical Engineering", 1981.
4. Petrenya Yu.K., Antonyuk O.V., Gavrilov S.N. Estimation of turbine generator tire vibration frequencies.// Electric plants. 2016. No 3. P.47–50.
5. Petrenya Yu.K., Antonyuk O.V., Gavrilov S.N. The problem of determining the frequency characteristics of stator oscillations of high-power turbogenerators. // Izvestiya RAN. Power Engineering. 2017. No. 4. P.37–43.
6. Vibration in engineering. Т.1 Oscillations of linear systems. / Revision of K.V. Frolov. Moscow: "Mechanical Engineering", 1981.
7. V.Sytogo, V.A. Sagomonov, V.I. Kislyakova, V.A. Bol'shakov. Vibro-absorbing materials based on thermoplastic elastomers // Proceedings of VIAM. 2013. No. 3.
8. V.A. Sagomonova, V.I. Kislyakova, V.A. Bolshakov, S.S. Dolgopolov. Influence of the reinforcing layer on the coefficient of mechanical losses of vibration-absorbing materials // Plastic Masses. 2015. No.3-4. P.13–16.
9. Pat. 168415 RU, IPC H02K 3/38/. Stator of an electric car. / Petrenya Yu.K., Antonyuk O.V., Gavrilov S.N. Published 02.02.2017. Bulletin No. 4.
Review
For citations:
Gavrilov S.N., Petrenya I.K. BUS BAR DAMPING IS A WAY OF INCREASING THE VIBRATION RELIABILITY OF TURBOGENERATOR STATORS. Power engineering: research, equipment, technology. 2019;21(1-2):19-27. (In Russ.) https://doi.org/10.30724/1998-9903-2019-21-1-2-19-27
Views:
522
Email this article 