Sensorless method of controlling the position of the movable element of the electric machine of the reciprocating action of
https://doi.org/10.30724/1998-9903-2017-19-7-8-133-143
Abstract
The article describes a Sensorless method for determining the position of the movable element electrical machines reciprocating action. The method is implemented on the basis of the data voltages of the windings and the results of measurements of parameters of electrical machines reciprocating action.
About the Authors
R. R. Gibadullin
Kazan state power engineering university, Kazan
Russian Federation
fourth-year PhD student of the Department of Industrial Power Supply (EPPS)
Russian Federation
fourth-year PhD student of the Department of Industrial Power Supply (EPPS)
A. N. Tsvetkov
Kazan state power engineering university, Kazan
Russian Federation
PhD in Engineering, associate professor of the Department of Industrial Power Supply (EPPS)
Russian Federation
PhD in Engineering, associate professor of the Department of Industrial Power Supply (EPPS)
I. V. Ivshin
Kazan state power engineering university, Kazan
Russian Federation
doctor of technical sciences, Professor, head of the Department of Industrial Power Supply (EPPS)
Russian Federation
doctor of technical sciences, Professor, head of the Department of Industrial Power Supply (EPPS)
L. V. Dolomanyuk
Kazan state power engineering university, Kazan
Russian Federation
PhD in Pedagogic, associate professor of the Department of Industrial Power Supply (EPPS)
Russian Federation
PhD in Pedagogic, associate professor of the Department of Industrial Power Supply (EPPS)
References
1. Sergeyenkova E.V. Sinkhronnaya elektricheskaya mashina vozvratno-postupatel'nogo dvizheniya (generator) (Synchronous electric machine of reciprocating motion (generator)): dis. ... kand. tekh. nauk: 05.09.01. M., 2011. 118 s.
2. Tsvetkov A.N., Misbakhov R.SH., Denisova N.V., Gibadullin R.R. Razrabotka ispytatel'nogo stenda dlya elektricheskikh mashin vozvratno-postupatel'nogo deystviya, rabotayushchikh v tyazhelykh usloviyakh (Development of a test bench for electric reciprocating machines operating under severe conditions) // Sbornik materialov I Vserossiyskoy nauchno-prakticheskoy konferentsii «Energetika i energosberezheniye»: teoriya i praktika. Kemerovo: 2014. S. 1–5.
3. Tsvetkov A.N., Misbakhov R.SH., Nizamiyev M.F., Gibadullin R.R. Skhemnyye resheniya dlya razrabotki ispytatel'nogo stenda dlya issledovaniy obratimoy mashiny vozvratno-postupatel'nogo deystviya (Scheme solutions for the development of a test bench for the study of a reversible reciprocating machine) // Sbornik materialov nauchno-tekhnicheskoy konferentsii i vystavki innovatsionnykh proyektov, vypolnennykh vuzami i nauchnymi organizatsiyami Privolzhskogo federal'nogo okruga. Nizhniy Novgorod: 2014. S. 34–36.
4. Makarov V.G., Tambov V.V. Obzor metodov bezdatchikovogo opredeleniya skorosti asinkhronnykh dvigateley (A review of methods of sensorless determination of the speed of asynchronous motors) // Mashinostroyeniye: setevoy elektronnyy nauchnyy zhurnal. 2014. №1. S. 34–38.
5. Andriollo, M., Dall'Ora, L., Martinelli, G., Tortella, A., “Performance comparison of saturated tubular linear permanent magnet generators by simplified FEAs”, ICRERA, 2012. p. 1–7.
6. Agustin Garcia Santana, Dan El Montoya Andrade, Antonio de la Villa Jaen, “Output Power of Linear Generator under Reactive Control in Regular Waves”, ICREPQ, 2011 p. 392–397.
7. Khiterer M.YA., Ovchinnikov I.Ye. Sinkhronnyye elektricheskiye mashiny vozvratnopostupatel'nogo dvizheniya (Synchronous electric machines for reciprocating motion). SPb.: KORONA print, 2004. 358 s.
8. Vinogradov A.B. Vektornoye upravleniye elektroprivodami peremennogo toka (Vector control of AC electric drives). Ivanovo: IGEU, 2008. 319 s.
9. Gulyayev I.V., Bobrov M.A., Yushkov I.S., Volkov A.V., Popov A.A. Bezdatchikovoye upravleniye sinkhronnym dvigatelem s postoyannymi magnitami (Sensorless control of a synchronous motor with permanent magnets) // Nauchno-tekhnicheskiy vestnik Povolzh'ya. 2015. №6. S. 119–122.
10. Tsvetkov A.N., Gibadullin R.R., Kopylov A.M., Dolomanyuk L.V. Stend dlya ispytaniya obratimykh elektricheskikh mashin vozvratno-postupatel'nogo deystviya (Stand for testing reversible electric machines of reciprocating action) // Sbornik materialov I Povolzhskoy nauchno-prakticheskoy konferentsii «Priborostroyeniye i avtomatizirovannyy elektroprivod v toplivno-energeticheskom komplekse i zhilichno-kommunal'nom khozyaystve». Kazan': 2015. S. 109–111.
Review
For citations:
Gibadullin R.R., Tsvetkov A.N., Ivshin I.V., Dolomanyuk L.V. Sensorless method of controlling the position of the movable element of the electric machine of the reciprocating action of. Power engineering: research, equipment, technology. 2017;19(7-8):133-143. (In Russ.) https://doi.org/10.30724/1998-9903-2017-19-7-8-133-143
Views:
384
Email this article 